2025 Gehl Construction Telehandlers GCT 3-14 +
- Year 2025
- Make Gehl
- Model Construction Telehandlers
- Engine model: 3TNV88C-DMU
2025 Gehl Construction Telehandlers GCT 3-14 +
2025 Gehl Construction Telehandlers GCT 3-14 +
Construction telehandlersA cost-effective, multi-purpose machine designed to save you both time and money, the GCT 3-14+ Telescopic Handler combines lift with height to deliver versatility at the job site. Offering 2,650lbs of lift capacity, this machine can lift, move, and place pallets of bricks, bales of hay, or whatever else your work demands. Designed for tough landscaping conditions or unpredictable environments such as equestrian centers, the GCT 3-14+ is a lightweight, ultra-compact machine that boasts all-terrain capabilities. It's built to go off-road, get in and out of tight spaces, and brave the path less taken.
Engine
Engine Manufacturer
Yanmar
Engine
model: 3TNV88C-DMU
Emissions
norm: Stage V / Tier 4 final
Displacement
1642 cm³
Engine Power
35.10 hp / 26.20 kW
Rated Engine Speed
1950 rpm
Cylinder Liners
3
Engine Torque, Maximum
105 Nm
Cooling System
3 radiators (water + hydraulic oil + fuel)
Drivetrain
Transmission
Hydrostatic | Differential lock Limited slip differential on front and rear axles
Gears
Number (forward / reverse): 2 / 2
Brakes
Parking Brake
Automatic negative parking brake | Service brake Hydraulic servo
Operational
Top Speed
Max. travel (may vary according to applicable regulations): 25 km/h
Operating Conditions
Breakout force with bucket: 1880 daN | Lifting: 8.80 s | Lowering: 7 s | Extension: 6.40 s | Retraction: 4.30 s | Crowd: 3.40 s | Dump: 2.60 s | Drawbar pull (Laden): 2000 daN
Performance
Noise Level
Noise at driving position (LpA) tested following NF EN 12053 norm: 76 dB | Noise to environment (LwA): 104 dB | Vibration on hands/arms: < 2.50 m/s²
Hydraulics
Pump Type
Gear pump
Hydraulic Flow
48 l/min
Maximum Pressure
235 bar
Dimensions
Wheelbase
2.13 m
Dimensions
Max. outreach: 2.62 m | Front overhang: 0.77 m | Tilt-down angle: 116 ° | Tilt-up angle: 23 ° | External turning radius (over tyres): 2.62 m
Overall Length
to carriage (with hitch): 3.47 m | to carriage (without hitch) 3.47 m
Overall Width
1.49 m | cab: 0.66 m
Overall Height
1.92 m
Height
Max. lifting: 4.30 m | Reach at max: 1 m
Ground Clearance
0.29 m
Capacities
Hydraulic Capacity
tank: 39 l
Fuel Capacity
tank: 35 l
Cargo Capacity
Max: 1202 kg
Weights
Weight, As Shipped
Shipping mass: min 2700 kg / max 2900 kg
Features
Features
Safety cab homologation: ROPS - FOPS cab (level 1) | Controls: Joystick
