2025 Gehl Construction Telehandlers GCT 3-14

Information

2025 Gehl Construction Telehandlers GCT 3-14

Construction telehandlers

A cost-effective, multi-purpose machine designed to save you both time and money, the GCT 3-14 Telescopic Handler combines lift with height to deliver versatility on the job site. Offering 2,200lbs of lift capacity (for more lift, see the GCT 3-14+), this machine can lift, move, and place pallets of bricks, bales of hay, or whatever else your work demands. Designed for tough landscaping conditions or unpredictable environments like equestrian centers, the GCT 3-14 is a lightweight, ultra-compact machine that boasts all-terrain capabilities. It's built to go off-road, get in and out of tight spaces, and brave the path less taken.

Photos

Highlights

  • Hensall, Ontario
  • 2025
  • Gehl
  • Construction Telehandlers GCT 3-14
  • model: 3TNV88C-DMU
  • Hydrostatic | Differential lock Limited slip differential on front and rear axles
  • Available
  • Max. lifting: 4.30 m | Reach at max: 1 m

Specifications

  • 2025
  • Gehl
  • Construction Telehandlers
  • GCT 3-14
  • General
  • model: 3TNV88C-DMU
  • Yanmar
  • norm: Stage V / Tier 4 final
  • 1642 cm³
  • 35.10 hp / 26.20 kW
  • 1950 rpm
  • 3
  • 105 Nm
  • 3 radiators (water + hydraulic oil + fuel)
  • Hydrostatic | Differential lock Limited slip differential on front and rear axles
  • Number (forward / reverse): 2 / 2
  • Automatic negative parking brake | Service brake Hydraulic servo
  • Max. travel (may vary according to applicable regulations): 25 km/h
  • Breakout force with bucket: 1880 daN | Lifting: 8.80 s | Lowering: 7 s | Extension: 6.40 s | Retraction: 4.30 s | Crowd: 3.40 s | Dump: 2.60 s | Drawbar pull (Laden): 2000 daN
  • Noise at driving position (LpA) tested following NF EN 12053 norm: 76 dB | Noise to environment (LwA): 104 dB | Vibration on hands/arms: < 2.50 m/s²
  • Gear pump
  • 48 l/min
  • 235 bar
  • Max. outreach: 2.62 m | Front overhang: 0.77 m | Tilt-down angle: 116 ° | Tilt-up angle: 23 ° | External turning radius (over tyres): 2.62 m
  • 2.13 m
  • to carriage (with hitch): 3.47 m | to carriage (without hitch) 3.47 m
  • 1.49 m | cab: 0.66 m
  • 1.92 m
  • Max. lifting: 4.30 m | Reach at max: 1 m
  • 0.29 m
  • tank: 39 l
  • tank: 35 l
  • Max: 998 kg
  • Shipping mass: min 2550 kg / max 2750 kg
  • Safety cab homologation: ROPS - FOPS cab (level 1) | Controls: Joystick